2 replies to this topic

[Estiqaatsi]

Hello everyone,

do you have any suggestions about standards to look for or in general material to study regarding the distribution of LN2? I am particularly interested in what should be provided to take care of the evaporation and gas removal, but in general the setup of the pipework with the typical accessories.
Thank you in advance

[breizh]

Hi,

Good to perform a search using your favorite search engine.

Pay attention to the low temperature when you select the piping material.

Drop an email to vendors of liquid nitrogen for more information.

Breizh 

 

Attached Files

•  900-13-081-US-Nov15-liquid-nitrogen-safetygram-7 (2).pdf   342.6KB   10 downloads

[Bobby Strain]

You are not likely to find such outside what your supplier supplies for equipment. You are on your own for the most part. Everything the vendor supplies will be stainless steel. You will connect to a carbon steel distribution network. The system will have a low temperature shutoff valve at the vaporizer exit. The decision you must make is how much stainless piping should be provided.

 

Bobby