|


Air Separation Hysys Model
#1
Posted 04 June 2024 - 12:40 PM
Thanks.
#2
Posted 15 June 2024 - 10:44 PM
I don't have one on me.
AspenTech esupport Article ID: 000057332, does present an integrated column model for Hysys that produces O2, N2 and Ar. Just grab it off the web using your esupport registration details.
However, it presents a bit too "black box" for me. I like to get a feel for the working parts of a process simulation.
This thesis:
appears to detail an operating Linde design:
https://www.linde.co...f-india-limited
So, if you have to build a model from the ground up, then you've got a useful starting point that reflects an industrial example.
Details of key simulation parameters (such as number of column stages) are clearly stated along with details of the process heat & material balance tables. Many write ups that I can spot quickly, exclude this sort of detail which would make it harder to use as a go-by. The author has even shared column profile data in terms of composition, flow, temperature and pressure. Columns are often difficult to converge without good initialisation data, so this go-by provides a useful assist in that regard as well.
Similar Topics
![]() ![]() Design Of Direct Contact After Cooler (Dcac) For Air Separation UnitStarted by Guest_Paulogeorge_* , 29 Jul 2025 |
|
![]() |
||
How To Model The Bitumen In Aspen Plus?Started by Guest_engrbab01_* , 28 Jul 2025 |
|
![]() |
||
![]() Pipe Segment In Hysys Not SolvingStarted by Guest_Frya_R_* , 20 Jul 2025 |
|
![]() |
||
![]() Teg Regeneration Hysys HelpStarted by Guest_connex_* , 17 Jul 2025 |
|
![]() |
||
Aspen Hysys Simulation Of Acid Gas Removal UnitStarted by Guest_R.t_* , 22 May 2025 |
|
![]() |