1 reply to this topic

[SHIRAM]

Dear Team members,

 

Instrument air dryer uses adsorbent  Alumina for removal of moisture designed for 100 % humidity & 45 Deg C  With lower humidity and feed temperature at 35 Deg C whats is impact on performance respect to dew point and capacity of the dryer. 

 

 

With regards

[breizh]

Consider this document to perform calculation about air, it should help .Another option could be Mollier Chart.

Did you try AI? You will be amazed. 

• Dew point: Likely same or better (lower) at 35 °C and lower RH than at 45 °C/100% RH, assuming regeneration is unchanged.

• Capacity:

  • Water removal rate (kg/h) decreases because the inlet air carries less moisture.

  • Effective capacity in terms of time at spec dew point increases—the dryer will stay “in spec” longer per cycle.

 

 

Breizh

Attached Files

•  Humidity.pdf   2.03MB   4 downloads