Hi I want the exact procedure of designing of any type of scrubber (diameter, ht, pressure drop) Can anyone will guide me.
|
Scrubber Design
Started by Mandar, Feb 14 2007 02:05 AM
4 replies to this topic
Share this topic:
#1
Posted 14 February 2007 - 02:05 AM
#2
Posted 05 April 2009 - 07:10 PM
QUOTE (Mandar @ Feb 14 2007, 03:05 AM) <{POST_SNAPBACK}>
Hi I want the exact procedure of designing of any type of scrubber (diameter, ht, pressure drop) Can anyone will guide me.
You are not helping yourself by not providing any details that you need help for. If you provide, then maybe we could all help you.
#3
Posted 06 April 2009 - 10:56 AM
QUOTE (Mandar @ Feb 13 2007, 10:05 PM) <{POST_SNAPBACK}>
Hi I want the exact procedure of designing of any type of scrubber (diameter, ht, pressure drop) Can anyone will guide me.
That type of information is best found in a textbook. A forum like this can only provide a very limited amount of information relevant to a specific problem. Not a good match.
#4
Posted 09 July 2009 - 03:26 AM
QUOTE (Mandar @ Feb 14 2007, 03:05 AM) <{POST_SNAPBACK}>
Hi I want the exact procedure of designing of any type of scrubber (diameter, ht, pressure drop) Can anyone will guide me.
Mandar,
You can check out the downloadable free spreadsheet for packed scrubber design at the following link.
It is fairly good and available at our very own 'Cheresources'.
http://www.cheresour.../software.shtml
Regards,
Ankur.
#5
Posted 12 July 2009 - 08:10 AM
Dear,
If you really want to learn the design the scrubber/packed column (infact any equipment) just go through any good book available for mass transfer equipment design book which will help you to understand the basic things which are considered while designing the scrubber/packed tower.
To Ankur,
I hope you got the contact details of Mr. Siddhrtha Mukerjee and you are ready with the spreadsheet based on his article. I hope you got the clearance from him to prepare the spreadsheet for the article which you have.Thanks in advance.
If you really want to learn the design the scrubber/packed column (infact any equipment) just go through any good book available for mass transfer equipment design book which will help you to understand the basic things which are considered while designing the scrubber/packed tower.
To Ankur,
I hope you got the contact details of Mr. Siddhrtha Mukerjee and you are ready with the spreadsheet based on his article. I hope you got the clearance from him to prepare the spreadsheet for the article which you have.Thanks in advance.
Similar Topics
Design And Fabrication Of Reflux DrumStarted by Guest_Femi_* , 22 Apr 2024 |
|
|
||
Jt Based Hcdp Design V/s Mechanical Refrigeration Hcdp Unit.Started by Guest_BabRafiq1_* , 19 Apr 2024 |
|
|
||
Rupture Disc DesignStarted by Guest_chaupradip_* , 13 Apr 2024 |
|
|
||
Falling Film Reactor Design CalculationStarted by Guest_Emranm02_* , 07 Apr 2024 |
|
|
||
Hot Oil Loop / Heating Medium DesignStarted by Guest_Lyne_* , 30 Mar 2024 |
|
|