3 replies to this topic

[antoil]

Hi!!

Does anyone knows the formula that gives the corrected density to 15 oC for petroleum (generalized products), and the formula that gives the volume correction factor to 15 oC??????

It is listed in ASTM petroleum measurement tables - volume X which I don't have.

I want to make an excel file that calculates automatically petroleum volume in 15oC, by just entering
the volume in physical temp.

[gn-sonatrach]

Hi!!

Does anyone knows the formula that gives the corrected density to 15 oC for petroleum (generalized products), and the formula that gives the volume correction factor to 15 oC??????

It is listed in ASTM petroleum measurement tables - volume X which I don't have.

I want to make an excel file that calculates automatically petroleum volume in 15oC, by just entering
the volume in physical temp.

Try my program

gn-sonatrach

Attached Files

•  DenVCF.zip   213.33KB   438 downloads

[JMW]

You may also try my spreadsheet which can also be found here: www.ViscoAnalyser.com/page8.html (where there are some other calculations).
I'd appreciate any feedback.
This spreadsheet includes the hydrometer corrections if required and presents the volume correction factor.
By using a suitable step sequence you can go from the observed density to an alternative density via base density, as required by the manual.
Do note, however, that the exact calculation from the manual is not used here as it is intended to be a practical aid and to provide metric data.

 Density_12Mb.xls   509KB   312 downloads