could anyone help me here?? i'm doing my final year project.. which is so2 removal using prepared absorbent using rice husk ash impregnated with metal oxide.. the problem is my breaktrough time (tb) is not following the trend i got from journal.. for reactor temperature parameter, from the journal the 'tb' for so2 removal will decrease as the reactor temperature is increase... i'm doing my experiment for 5 different temp. and for t = 150c, 180c, 200c, 230c it follows the trend but for t = 250c the tb is increase... f.y.i i've repeat the experiment for 2 times for each absorbent i've prepared (2 type of absorbent) but the result is the same... could anyone help me????
this are the result:
temp. (celcius)......................breaktrough time (minutes)
150..................................................40
180..................................................24
200..................................................17
230..................................................10
250..................................................25
SO2 concentration = 2000 ppm
|
So2 Removal Using Rice Husk Ash..
Started by lexussight, Feb 20 2008 06:56 AM
No replies to this topic
Share this topic:
#1
Posted 20 February 2008 - 06:56 AM
Similar Topics
Co2 Removal Membranes Between Compressor StagesStarted by Guest_Sinclc_* , 26 Mar 2024 |
|
|
||
Carbon Filter Used In Hot Benfield Solution For Co2 Removal In AmmoniaStarted by Guest_Abhishek Taware_* , 14 Jul 2023 |
|
|
||
H2S Removal From BiogasStarted by Guest_Aliceat2000_* , 24 Jul 2022 |
|
|
||
Mercury Removal Unit - Aspen HysysStarted by Guest_JJquispedelgado_* , 21 Apr 2022 |
|
|
||
Removal Of Vapor Gases Above The Liquid In Storage TanksStarted by Guest_Aziz-621_* , 09 Jun 2021 |
|
|