hello, im currently learning how to use Dynsim 4.2.3 dynamic simulator for cryogenic depressuring for a relief system in a compressor plant, the advantages shown in this simulator are that it can calculate the mean metal temperature, wich is useful, for mechanical engineers when metal reaches cryogenic tempeatures, and helps them choose wich is the appropiate material for the process based on that information,those cryogenic temperatures are found generally because of the high pressure expansion that occurs in the relieft system of the last stages of compression.
im having trouble with the simulation do to some parameters that are not quite working for me, and im guiding myself with the example that the simulator brings in its documentation ( cryogenic depressuring). i would like to exchange some opinions with anybody who has experience in the use of this simulator, i have some serious doubts , that could put me in the right direction, because right now im kind of stuck do to some parameters i think im inputing wrong.
thank you
regards.
|
Cryogenic Depressuring (dynsim 4.2.3)
Started by Miguel, Feb 12 2009 12:00 AM
No replies to this topic
Share this topic:
#1
Posted 12 February 2009 - 12:00 AM
Similar Topics
Cryogenic Distillation To Produce Nitrogen GasStarted by Guest_Eng4324_* , 04 Mar 2024 |
|
|
||
Design Considerations For Cryogenic Submersible PumpStarted by Guest_heydari_* , 04 Feb 2024 |
|
|
||
Converging Cryogenic Air Separation In HysysStarted by Guest_rgc1994_* , 22 Mar 2017 |
|
|
||
Cryogenic Separation Of Steam Reforming SyngasStarted by Guest_Fjm989898_* , 15 May 2023 |
|
|
||
Cryogenic Distillation For Oxygen And NitrogenStarted by Guest_xyadap_* , 23 Mar 2023 |
|
|