Hi all,
I have conducted a deltaP measurement on our pilot scrubber during operation. The results was 450 mm H2O.
I am not sure I understand the result, since 1 atm=10m of water. How should i analyse the result? Does it mean that the system is in "under-pressure" as in vacume?
|
U Tube Column Results Analysis
Started by RomanKatz, Oct 01 2012 02:02 PM
1 reply to this topic
Share this topic:
#1
Posted 01 October 2012 - 02:02 PM
#2
Posted 01 October 2012 - 05:57 PM
It means that the head loss through the packing is 450 mm H2O .In other words if the pressure at the top of the column is atmospherical pressure , it will be # 1.0435 atm at the bottom
Breizh
Breizh
Edited by breizh, 01 October 2012 - 05:59 PM.
Similar Topics
Simulating A Single Tube Heat Exchanger In Aspen HysysStarted by Guest_catia_* , 02 May 2024 |
|
|
||
Calculate Mabp,wabp,cabp And Meabp From Distillation Astm D86 ResultsStarted by Guest_barks123_* , 30 Apr 2024 |
|
|
||
Diked Area Around Distillation ColumnStarted by Guest_hysyshunter_* , 15 Apr 2024 |
|
|
||
Distillation Column Decommissioning ChecklistStarted by Guest_m.bhut_* , 08 Apr 2024 |
|
|
||
Distillation Column DiameterStarted by Guest_refluxraider_* , 12 Mar 2024 |
|
|