Dear all,
I am currently doing a ProMax Simulation on Amine system. However, I am stuck at the recycling.
Here is the thing, I am using MDEA to remove both CO2 and H2S. The requirement is 50ppmv of CO2 in the treated gas (sweet gas) stream. This could be done by manually adjusting the amine circulation.
However, after recycling the loop, the values ran and the specification could not be achieved.
I know I can use a solver for this, but the thing is I can't select the mole. fraction of CO2 as the measured variable (or i don't know how to). Hence, I'd appreciate if any of you can tell me what to do now?
How exactly do I use a solver?
Best Regards,
Loo
|
Promax On Amine System
Started by looloolol, Jul 12 2010 12:43 AM
1 reply to this topic
Share this topic:
#1
Posted 12 July 2010 - 12:43 AM
#2
Posted 12 July 2010 - 11:31 AM
Loo:
This has nothing to do with your resolution; but it has a lot to do with your following Forum rules: Stop making multiple postings of the same topic.
I have deleted your duplicate posting in the Student Forum. Don't make me work overtime looking for your multiple postings. Otherwise, I could accidentally delete all of your postings.
Thank you.
Similar Topics
Tank Blanketing With Natural Gas/ Vapor Recovery SystemStarted by Guest_MethanolPlant_* , 26 Apr 2024 |
|
|
||
Handling The Limited Capacity Of Flare SystemStarted by Guest__1angelia23_* , 05 Apr 2024 |
|
|
||
Closed Drain SystemStarted by Guest_Falah_* , 26 Mar 2024 |
|
|
||
Lube Oil System For TurbomachineryStarted by Guest_bckesim_* , 03 Mar 2024 |
|
|
||
Design Criteria For Sizing Sump Drum Of Close Drain System In Tank FarStarted by Guest_AnbIran_* , 28 Feb 2024 |
|
|