I am about to carry out the leak test of HDT reactor and other High Pressure systems at 70 kg pressure with Hydrogen, in newly constructed project, before start-up. The MDMT given by manufracturer is 16 deg C and MPT is 80 deg C. It is difficult to carry out the leak of system at 80 deg C with soap solution, if I have to follow the MPT.
In my earlier projects of similar kinds, I had not used MPT for leak test and leak test was carried out at ambient temperature only.
My question is wheteher I have to follow the MPT requirement or MDMT for the initial leak test ?
If MPT needs to be followed strictly, what method I have to use for detcting the leaks in the system ?
Please Guide me.
|
No replies to this topic
Share this topic:
#1
Posted 24 August 2012 - 11:13 PM
Similar Topics
Heat Exchanger Temperature CrossStarted by Guest_kaidlut_* , 20 Dec 2022 |
|
|
||
Temperature Cross Heat ExchangerStarted by Guest_Priolo_* , 12 Aug 2019 |
|
|
||
Cross Temperature In Heater Exchanger (Lng)Started by Guest_Yogan_* , 21 Feb 2024 |
|
|
||
Minimum Tower DiameterStarted by Guest_AnbIran_* , 17 Nov 2023 |
|
|
||
Propane Product Temperature Correction FactorStarted by Guest_loggrrr_* , 20 Nov 2023 |
|
|