Dear All,
Require suggestions to improve the quantity of water injection in a water injection plant.
|
Posted 13 June 2014 - 12:24 AM
Dear All,
Require suggestions to improve the quantity of water injection in a water injection plant.
Posted 13 June 2014 - 05:55 PM
Install an appropriately designed injection pump.
(without any basic data received from you, that is all you can get from me)
Posted 20 June 2014 - 01:26 AM
Install an appropriately designed injection pump.
(without any basic data received from you, that is all you can get from me)
Sir,
The plant has depurators(4) , de-oiled pump (dedicated to depurators), injection tank (for providing with make-up water),heaters, filters (14 walnut shell filters) and also injection pumps (6). The problem we are facing is that the injection rates are slow. Exsisting filters require backwash but we dont have suffiicent backwash margin to clean them. Also frequent scaling problems and strainer cleaning problems despite chemicals addition at various site. Filters are 6th generation. Any ideas for better ways to reduce downtime and also increase flow?
Waste WaterStarted by Guest_refluxraider_* , 14 Apr 2024 |
|
|
||
Water Seal DrumStarted by Guest_Ali4269278331_* , 05 Apr 2024 |
|
|
||
Rapid Depressurization Of WaterStarted by Guest_golegolegole_* , 31 Mar 2024 |
|
|
||
Sulfuric Acid PlantStarted by Guest_Kartik54_* , 16 Mar 2024 |
|
|
||
Water Seal Pot Of Prv Working PrincipleStarted by Guest_panagiotis_* , 23 Feb 2024 |
|
|