Hello everyone,
I am working on knock out drum design. I have to size it in an excel sheet. I am not getting the actual designing steps in any books or articals. So can anyone guide me regarding this??
|
Posted 12 January 2017 - 02:25 AM
Hello everyone,
I am working on knock out drum design. I have to size it in an excel sheet. I am not getting the actual designing steps in any books or articals. So can anyone guide me regarding this??
Posted 12 January 2017 - 02:49 AM
Hi,
Refer API-12J / GPSA / SHELL DEP
Posted 12 January 2017 - 03:49 AM
I recommend you to vet this platform . Look for realted blogs on google etc. It will enhance your knowledge.
To start with look for Souder's brown equation.
Posted 13 January 2017 - 08:02 PM
Hi ,
let you study this material . Good luck.
Breizh
Posted 16 January 2017 - 07:38 AM
Hi, I have a related question. I need to design a separator for liquid degassing. What equations can I use? It is the same as for separating liquid from gas stream?
Flash Steam Vessel SizingStarted by Guest_JohnFields343_* , 24 Apr 2024 |
|
|
||
Design And Fabrication Of Reflux DrumStarted by Guest_Femi_* , 22 Apr 2024 |
|
|
||
Water Seal DrumStarted by Guest_Ali4269278331_* , 05 Apr 2024 |
|
|
||
Pump Sizing ConsiderationsStarted by Guest_panagiotis_* , 07 Apr 2024 |
|
|
||
Barometric Legs Line SizingStarted by Guest_panagiotis_* , 17 Mar 2023 |
|
|