Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

0

Activated Carbon For Mdea Solution


2 replies to this topic
Share this topic:
| More

#1 CheAmine

CheAmine

    Junior Member

  • Members
  • 26 posts

Posted 04 October 2017 - 05:00 AM

Hello,

 

We are currently looking for different suppliers of activated carbon for cost optimization purposes only. Currently, We are NOT facing any operational problems (i.e foaming..etc) in the acid gas removal units. I would like to know the important specification of the activated carbon that shall be looked into to decide the most viable option technically and economically.

 

Thank you in advance.

 

Regards,



#2 iplan

iplan

    Veteran Member

  • ChE Plus Subscriber
  • 49 posts

Posted 13 October 2017 - 11:03 PM

CheAmine,

 

Some important parameters to select  Activated Carbon for Amine filtration are Phosphorus content, Iodine number and molasses number. Please refer to  the book " Gas Purification" by Arthur L Kohl/Richard Nielsen  for further reading. Thanks



#3 breizh

breizh

    Gold Member

  • ChE Plus Subscriber
  • 4,310 posts

Posted 15 October 2017 - 02:17 AM

Hi ,

About AC you need to know what to do with spent AC .In China these days it's becoming very complicated to dispose this material and expensive too . You probably need to select a vendor able to offer a regeneration capability either in house or at their place .

Company like Calgon is offering this type of service.

 

My view

Breizh






Similar Topics