Hello, I have learned how to calculate the recovery of flash separations using k values. However, I wish to improve the efficiency of the separation in my column using a demister pad. How do I take this into account when doing my calculations?
|
0
Calculate Flash Drum Recovery
Started by chessboss, Nov 18 2017 10:41 AM
2 replies to this topic
Share this topic:
#1
Posted 18 November 2017 - 10:41 AM
#2
Posted 19 November 2017 - 05:37 AM
Hi ,
Consider the resource attached , mesh is there to minimize carry over and to improve the size of the equipment .
Hope this is going to help you.
Breizh
#3
Posted 19 November 2017 - 05:11 PM
The two items are unrelated. Maybe you can tell us a bit more about your assigned task.
Bobby
Similar Topics
Answered
Design And Fabrication Of Reflux DrumStarted by Guest_Femi_* , 22 Apr 2024 |
|
|
||
Calculate Mabp,wabp,cabp And Meabp From Distillation Astm D86 ResultsStarted by Guest_barks123_* , 30 Apr 2024 |
|
|
||
How To Right Size A Vapor Recovery Unit (Vru)?Started by Guest_MethanolPlant_* , 29 Apr 2024 |
|
|
||
Tank Blanketing With Natural Gas/ Vapor Recovery SystemStarted by Guest_MethanolPlant_* , 26 Apr 2024 |
|
|
||
Flash Steam Vessel SizingStarted by Guest_JohnFields343_* , 24 Apr 2024 |
|
|