Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

1

Hydrogen Purification With Pressure Swing Adsorption

psa engineering chemical hydrogen naturalgas reformer chemistry adsorption seperation ch4

No replies to this topic
Share this topic:
| More

#1 Abnaan_706

Abnaan_706

    Brand New Member

  • Members
  • 4 posts

Posted 11 February 2019 - 06:44 PM

Hey guys, I've been tasked to design a PSA system for the purification of hydrogen from natural gas to a purity of 99.9% for my individual task. The initial material balances have been completed, therefore the composition of the feed going into the PSA is shown in the image. I've been told by my supervisor to design a 4 bed PSA system and from research have concluded that i need activated carbon and zeolite 5A for the adsorbents. How would I go from knowing the flowrate/mol comp in the feed to actually design the PSA.
 
Thanks

 

Attached Files


Edited by Abnaan_706, 11 February 2019 - 06:46 PM.





Similar Topics