hello,
i am a chinese student from australia doing chem/eng. i am given an ion exchange assignnment to do, which i need to design an ion exchang system to recover 99% of the copper ions from an electroplating waste stream. the stream has a flow rate of 2000 L/hr and a Cu2+ concentration of 100ppm.
the report need to have a explanation of the procedure for designing the eqipment. what are the key parameters that determine the performance and capital cost of the equipment? what are the equations that allow the performance to be estimated, and how should they be applied? finally, i need to give a solution the the posed design problem, which illustrates the application of the detailed design procedure. and it should be specifying overall dimensions of the equipment, materials of construction and the value of key design parameters theat affect performance.
can anyone tell me how to start for the report? thanks.
|
Ion Exchange Of Cu+ System
Started by Guest_yakumo_*, Sep 17 2005 09:39 AM
No replies to this topic
Share this topic:
#1 Guest_yakumo_*
Posted 17 September 2005 - 09:39 AM
Similar Topics
Tank Blanketing With Natural Gas/ Vapor Recovery SystemStarted by Guest_MethanolPlant_* , 26 Apr 2024 |
|
|
||
Handling The Limited Capacity Of Flare SystemStarted by Guest__1angelia23_* , 05 Apr 2024 |
|
|
||
Closed Drain SystemStarted by Guest_Falah_* , 26 Mar 2024 |
|
|
||
Lube Oil System For TurbomachineryStarted by Guest_bckesim_* , 03 Mar 2024 |
|
|
||
Design Criteria For Sizing Sump Drum Of Close Drain System In Tank FarStarted by Guest_AnbIran_* , 28 Feb 2024 |
|
|