Dear Fellows;
Could You please name the standard which is being used in oil and gas processing plant for setting alarm and trip value of Gas detectors.
Regards,
Kashif
|
Posted 09 October 2019 - 01:25 AM
Dear Fellows;
Could You please name the standard which is being used in oil and gas processing plant for setting alarm and trip value of Gas detectors.
Regards,
Kashif
Posted 09 October 2019 - 01:52 AM
http://www.hse.gov.u...gasdetector.pdf
Hi ,
You should talk to the vendor of gas detectors .
The link above will give you pointers
my view
Breizh
Posted 09 October 2019 - 02:45 AM
The default setting from vendor is 20 % of Methane LEL as alarm and 40% of LEL is trip. But these are just default setting without any standard reference.
![]() Transfer Water By Gravity - Maximum Velocity CriteriaStarted by Guest_56200358_* , 05 Mar 2025 |
|
![]() |
||
![]() Closed Loop Pump Suction Line Sizing CriteriaStarted by Guest_Afshin445_* , 30 Aug 2024 |
|
![]() |
||
Design Pressure Criteria For Reflux DrumStarted by Guest_KartikJ@15_* , 05 Aug 2024 |
|
![]() |
||
Design Criteria For Sizing Sump Drum Of Close Drain System In Tank FarStarted by Guest_AnbIran_* , 28 Feb 2024 |
|
![]() |
||
Pump-Continuous Flow After TripStarted by Guest_stu_* , 28 Jan 2024 |
|
![]() |