I don't work in this process but i question whether we are getting our sst plates to 120c in the center.
The plates are 1/8" thick and coated with a polyimide(50um) thick on top. The bottom is uncoated but rides a 10um thick conveyor through the oven. The oven is 7m long and goes 2 meter/min. The oven is 175c.
Been a long time for me to try to figure something like this out...i are am confused because i seem to need to know the heat flux to get the temperature profle through the metal by dwell time.
Any suggestions?
|


Temperature Profile Through Stainless.
Started by LittleFish, Nov 17 2020 12:50 PM
1 reply to this topic
Share this topic:
Similar Topics
Monoethanolamine Specific Heat Function Of TemperatureStarted by Guest_Lila54_* , 29 Dec 2020 |
|
![]() |
||
How To Calculate Lmtd With 2 Different Inlet Temperature (Mixer)Started by Guest_dhimas.ad_* , 21 Dec 2020 |
|
![]() |
||
Error Analysis Of Log Mean Temperature DifferenceStarted by Guest_Chemenglover_* , 15 Nov 2020 |
|
![]() |
||
Cascade Controller On Two Temperature TransmittersStarted by Guest_A.Kangaris_* , 18 Sep 2020 |
|
![]() |
||
How To Evaluate The Dielectric Constant Of The Oil At High TemperatureStarted by Guest_ankitg009_* , 08 Sep 2020 |
|
![]() |