Jump to content

Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

Sizing Three Phase Separator

This topic has been archived. This means that you cannot reply to this topic.
31 replies to this topic
Share this topic:
| More

#26 aliraza


    Brand New Member

  • Members
  • 8 posts

Posted 01 February 2010 - 02:31 AM

Dear Engprocess,

I'll be very greatful to you if you could send me the sheet of 3 phase separators.


Ali raza

#27 Chem_Proc_Eng


    Brand New Member

  • Members
  • 9 posts

Posted 01 February 2010 - 10:38 AM

Dear Mr. Amir,
Can you fwd me the excel sheet for 3 phase seperator?
My mail ID: chem_proc_eng@hotmail.fr
Thanks & Regards,

#28 millne123


    Brand New Member

  • Members
  • 4 posts

Posted 22 February 2010 - 06:29 PM

I will send you some reference material along with a methodology for doing the calculations. Note for the three phase seperator, the vessel length and diameter is determined by the limiting case, i.e either vapor liquid seperation or liquid liquid separation. Its typical to calculate the L and D for both cases, with the final vessel design being selected based upon which case provide the maximum diameter and length.

Please see attached presenatation and also website reference http://www.red-bag.com/. Please go to the library where you will find general guides for sizing vessels and other equipments.

Attached File  Pipestill.ppt   228KB   222 downloads


#29 Abhijeet Shete

Abhijeet Shete

    Junior Member

  • Members
  • 16 posts

Posted 02 March 2010 - 07:41 PM

Hi sir,

Can you please send me the exel sheet and procedure for the vertical 3-Phase sepearator.

my mail ID is abhijeet.shete@yahoo.co.in

Thanks in advance,


#30 lokesh_09


    Veteran Member

  • Members
  • 44 posts

Posted 02 March 2010 - 09:59 PM

Dear Amir,

Can you please send me the total procedure to logesh423@yahoo.co.in

Thanks & Regards,

#31 KTP


    Brand New Member

  • ChE Plus Subscriber
  • 8 posts

Posted 18 March 2010 - 12:28 PM

Mr Amir
Is it possible to send me the excell file for three phase separator sizing at

#32 Sherif Morsi

Sherif Morsi

    Gold Member

  • Members
  • 166 posts

Posted 18 June 2010 - 10:54 AM

Hello everyone,

I got the sizing procedure entitled: "Successfully Specify Three-phase separators"
I have a problem with it. The step which uses table 3 in the paper to calculate Ad / A. Step no. 9g

Could someone explain it to me? I am trying to do some trial and errors now but it's leading me nowhere !!

Similar Topics