Jump to content

  2. →
  3. →


Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

Sizing Of Vacuum/relief Valve On Storage Tank

Started by gvdlans, Mar 23 2004 08:25 AM

This topic has been archived. This means that you cannot reply to this topic.
134 replies to this topic
Share this topic:
| More

#26 Guest_Sameer_*

Guest_Sameer_*
  • guestGuests

Posted 24 October 2005 - 08:13 PM

Dear Mr. Montemayor

I am a Process Engineer working for an EPC company. I would like to get your excel workbook.
If possible please email me at

ssharma@ykh.chiyoda.co.jp

Thanks a lot

Sameer Sharma

#27 Guest_Trefor_*

Guest_Trefor_*
  • guestGuests

Posted 02 November 2005 - 01:05 AM

Hi Art,

Could I get a copy of your much sort after work book
my email address is tsymonds@jllennard.com.au
Cheers
Trefor

#28 Guest_Jayadev.Devulapally_*

Guest_Jayadev.Devulapally_*
  • guestGuests

Posted 09 November 2005 - 12:15 AM

Mr Montemayor

Read the valuable discussion on the subject.I am a chemical engineer and will appreciate receiving a copy of your Excel spread sheet.My email address is devuj273@telus.net
Regards
Jayadev

#29 Guest_Kirsten McFadin_*

Guest_Kirsten McFadin_*
  • guestGuests

Posted 29 November 2005 - 09:39 AM

Mr. Montemayor,

I am a chemical engineer working with various chemical plants in the southeastern U.S. I would like to receive a copy of your Excel spreadsheet. My e-mail address is kmcfadin@atslab.com. Thank you.

Kirsten McFadin

#30 Zack Adam

Zack Adam

    Junior Member

  • Members
  • 11 posts

Posted 21 December 2005 - 01:53 AM

Hi Mr. Montemayor;

I am Zulkernain Adam From Malaysia. You can call me Zul

I'm currently working as a Process Engineer with Petronas Carigali Sdn. Bhd. (PCSB), base in Malaysia.

I would appreciate if you can email the valuabe excell spreadsht to me also at zulkernain70@gmail.com or zulkernain_matadam@petronas.com.my

Regards
Zul

#31 'Diran Babalola

'Diran Babalola

    Brand New Member

  • ChE Plus Subscriber
  • 2 posts

Posted 21 December 2005 - 04:38 PM

I am a new member in this forum. I also need this Excel sheet on relief valve sizing. You can email it to me on diran.babalola@tri-ocean.com

#32 Guest_hgjdesai_*

Guest_hgjdesai_*
  • guestGuests

Posted 15 January 2006 - 05:18 AM

dea art,
pl. mail me ur valued worksheet. hiru@desai@rediffmail.com
thks

#33 Guest_Guest_ALI_*

Guest_Guest_ALI_*
  • guestGuests

Posted 15 January 2006 - 11:50 AM

Hi Mr. Montemayor
I am a Chemical Engineer from Pakistan. I am very much interested in your Excel Sheet.
My email is smarty_1984@hotmail.com
I will wait for you reply. Thanks in advance

#34 Guest_Umesh Sharma_*

Guest_Umesh Sharma_*
  • guestGuests

Posted 10 February 2006 - 11:17 PM

Hi Mr. Montemayor
I am a Environmental Engineer from India. I am very much interested in your Excel Sheet.
My email is sheelforum@indiatimes.com
I will wait for you reply. Thanks in advance
rolleyes.gif rolleyes.gif

#35 Guest_Eric_*

Guest_Eric_*
  • guestGuests

Posted 14 February 2006 - 06:27 PM

I know this is an old topic, but noticed people still requesting the spreadsheet from this year.

I am working on an oil sands upgrader and would appreciate the spreadsheet for reference purposes.

Please email to eric.lam@ameccolt.com. However, the moderator can be picky about what emails get through to that email address. If you have troubles, please email it to emhlam@hotmail.com.

Thanks!

#36 Guest_Vladimir Karanovic_*

Guest_Vladimir Karanovic_*
  • guestGuests

Posted 21 February 2006 - 04:53 AM

[quote name='Art Montemayor' date='Mar 23 2004, 10:37 PM' post='1355']
Guys:

Dear Art,

I am a chemical engineer from the UK, and I am very intersetd to have your spreadsheet for pressure/vacuum valves sizing.

Look forward to hearing from you.

e-mail: karanco@lineone.net


Regards,

Vladimir

#37 Guest_James Kieffer_*

Guest_James Kieffer_*
  • guestGuests

Posted 21 February 2006 - 09:42 AM

Art,

I am the Process Dept. Mgr. for a small engineering company, Hunt-Guillot & Associates, in Ruston, LA. I have a couple of chemical engineers validating sizing of pressure and vacuum relief for several storage tanks for a chemical company. We are also validating rupture disks and relief valves on reactors and other production vessels.

I believe your Excel Workbook would be very helpful. Please e-mail a copy to jkieffer@hga-llc.com. I greatly appreciate your offer and comments.

Thanks,
James Kieffer
Ruston, LA

#38 Guest_Prem_*

Guest_Prem_*
  • guestGuests

Posted 13 March 2006 - 09:17 AM

I'm working on sulfur storage tank and would appreciate your worksheet for reference.

email me at: premsarda@gmail.com.

Thanks

#39 Guest_Joan-Manel Claveria_*

Guest_Joan-Manel Claveria_*
  • guestGuests

Posted 16 March 2006 - 04:38 AM

...

#40 suresh2

suresh2

    Junior Member

  • Members
  • 24 posts

Posted 16 March 2006 - 10:49 AM

Dear Art,

I am a Chemical Engineering graduate from Texas A&M kingsville.

I was not aware of control valves. I always go through your replies. now i got some idea about control valves sizing.

I like your way of answering a question, starting from basics, which a student could understand.

I would appreciate if you could send me Pressure/Vacuum relief valve sizing Excel sheet.

E-mail: s_asireddy@yahoo.com

Thanks a lot

sureshreddy asi.

#41 Guest_Anand Rao_*

Guest_Anand Rao_*
  • guestGuests

Posted 22 March 2006 - 01:59 AM

Dear Art,

I am a chemical engineer and working with BS&B Safety Systems. I do the sizing (mechanical that is) day in and day out as a part of my job. I am overwhelmed by the response to your excel sheet and would be interested to have a look at it too...

My mail id is apr1@sanmargroup.com

Can you please send a copy to me.

Many thanks & Regards

Anand Rao

#42 Guest_Jay Howard_*

Guest_Jay Howard_*
  • guestGuests

Posted 23 March 2006 - 07:50 AM

Art,

I am a process engineer at Fluor and have just been asked about calculating vacuum relief for use with a deaerator. A copy of your Excel workbook would be a great help I think.

Thanks in advance for your help and workbook.

jay.howard@fluor.com

#43 Guest_Daniel Gomes_*

Guest_Daniel Gomes_*
  • guestGuests

Posted 29 March 2006 - 12:51 PM

Hello Art,

I'm a process engineer working at a small company in Brazil, could you please send me a copy your spreadsheet? It would be most helpful.

Thanks!

Daniel.

#44 Guest_Daniel Gomes_*

Guest_Daniel Gomes_*
  • guestGuests

Posted 29 March 2006 - 12:53 PM

Hello Art,

I'm a process engineer working at a small company in Brazil, could you please send me a copy your spreadsheet? It would be most helpful.

my email dgomes@rtsengenharia.com.br

Thanks!

Daniel.

#45 Guest_Guest_Babu_*_*

Guest_Guest_Babu_*_*
  • guestGuests

Posted 30 March 2006 - 01:14 AM

Hi I would like to obtain the excel spread sheet. My email address is babuchemy@yahoo.com
regards
Babu
South Australia

#46 asim_umer

asim_umer

    Brand New Member

  • Members
  • 6 posts

Posted 31 March 2006 - 03:14 PM

I am a chemical engineering and studying for Postgraduate. Kindlly send me EXCEL BOOK.

Best Regards
Asim Umer
asim_umer@uetian.com

#47 Adriaan

Adriaan

    Gold Member

  • Members
  • 118 posts

Posted 07 April 2006 - 05:35 AM

For steam vessels there is a quite simple rule; relief valves have to be dimensioned in such a way that the pressure with the relief valve(s) open cannot exceed a certain limit (normal pressure + 10 % or something like that).

I would presume that to determine the relief valve(s) size (be it for pressure or vacuum) you would take the most extreme scenario (for vacuum a half full hot tank in a sudden ice storm would be pretty extreme <wink>) and calculate the capacity needed to keep the pressure within acceptable limits?

#48 Guest_Hardik Patel_*

Guest_Hardik Patel_*
  • guestGuests

Posted 09 April 2006 - 03:51 PM

Hey Art Montemayor

I m a chemical engineer and working in engineering firm and my job duties are designing of pressure/ vacuum relief valve (PVSV) on LP tanks. I m designing PVSV for last 8 monts and i would like to get your excel sheet and i know it might be useful for me.

My email address is Hardik@schmart.com or Hardy_ptl@yahoo.com

i would appriciate if you send me your excel sheet to this email address.

Hardik Patel

#49 Guest_sudip chakrabarti_*

Guest_sudip chakrabarti_*
  • guestGuests

Posted 19 April 2006 - 03:46 AM

Mr. Montemayor

I would like to get your excel workbook. i will higly appreciate if you can email me at
sudip.kumar@sg.prosafe.com

#50 beejay

beejay

    Brand New Member

  • Members
  • 1 posts

Posted 27 April 2006 - 05:00 PM

Hello Art,

I will truly appreciate receiving your excell workbook. Please send to bmomah@hotmail.com
Back to Relief Devices Forum

Similar Topics




  1. Cheresources.com Community
  2. → Relief Devices
  3. → Relief Devices Forum
  4. Guidelines / Rules for Posting