Refining, Hydrocarbons, Oil, and Gas
Discussions related to the refining, petroleum processing, oil, and gas.
Separator Before Desalting PackageStarted by Matteo Giorgio Marrano , 10 Dec 2008 |
|
|
||
Selecting Co2 Portable Fire Extinguisher CapacityStarted by Narayanan.u , 03 Dec 2008 |
|
|
||
Centrifugal Compressor Lean Out & Low Suction Pressure TripStarted by umeshr , 17 Dec 2008 |
|
|
||
Stripping Gas SourcesStarted by Graduate process ENG , 22 Aug 2008 |
|
|
||
Propane Truck Loading FacilityStarted by Shauno , 13 Dec 2008 |
|
|
||
Location Of Edp ValveStarted by smalawi , 13 Dec 2008 |
|
|
||
Heavy Loss Of Glycol During Booster Compressor StartupStarted by Guest_P/ENG_* , 13 Oct 2008 |
|
|
||
Flare Load MitigationStarted by Mukund Balachandran , 22 Aug 2008 |
|
|
||
Help MeStarted by mehdi salehi , 12 Dec 2008 |
|
|
||
Article From 1976 Hydrocarbon ProcessingStarted by iplan , 29 Oct 2008 |
|
|
||
DepressurizingStarted by mohammadhosseinzadeh , 09 Sep 2008 |
|
|
||
Propylene Storage Tank In Crude Oil RefineryStarted by Afshin445 , 18 Oct 2008 |
|
|
||
Modifications For Improvement In Minimum Flow SystemStarted by Travesh , 04 Nov 2008 |
|
|
||
Chemical Decontamination Using Kmn04Started by iplan , 03 Dec 2008 |
|
|
||
Process Control EngineeringStarted by mishra.anand72@gmail.com , 03 Dec 2008 |
|
|
||
Process Control EngineeringStarted by mishra.anand72@gmail.com , 03 Dec 2008 |
|
|
||
Process Control EngineeringStarted by mishra.anand72@gmail.com , 03 Dec 2008 |
|
|
||
Sour Water Stripper Psv LocationStarted by Abhijeet Shete , 24 Nov 2008 |
|
|
||
Lpg Storage Tanks Maximum Liquid Level And Fill RateStarted by terry e quinn , 26 Aug 2008 |
|
|
||
Performing A Hydrate StudyStarted by clockwork , 06 Oct 2008 |
|
|
||
Light Crude DewateringStarted by Guest_Euan_* , 12 Feb 2007 |
|
|
||
Silica Gel Unit DimensioningStarted by fra.telli , 21 Nov 2008 |
|
|
||
Vertical Exchanger, 1/3 Pass Question.Started by omnibus , 03 Nov 2008 |
|
|
||
Cryogenic Heat ExchangersStarted by Zauberberg , 23 Oct 2008 |
|
|
||
Heat Exchanger Bypass Control SizingStarted by sundeep gupta , 13 Nov 2008 |
|
|