Hi,
I am currently operating my system at design pressure of 810 PSIG. The system volume is low (~1m3). I want to depressurize my system using RO.
Concerns :-
1. When depressurized in 15 minutes (as per API), the estimated RO size is too less (3mm) and which is not acceptable due to risk of clogging.
2. When depressurized with minimum acceptable RO size (7mm), the depressurization time is 2 minutes. (too less, the depressurization rate is very high).
Please advise a solution. Does multiple RO in series can help ?
Edited by T_bag, 27 February 2024 - 11:52 AM.